(562) 249-2437hi@lakewoodconcreteandmasonry.com
Caliber Lakewood Concrete and MasonryRequest an estimate

Masonry Contractor in Fullerton, CA - Brick and Block Work That Holds Up

Caliber Lakewood Concrete and Masonry is a masonry contractor working in Fullerton, CA. We repair and build brick, block and stone, from cracked garden walls and tired chimneys to retaining walls, pavers and outdoor kitchens.

  • I come out myself I look at your job in person before anyone prices it.
  • A small crew The small crew I work alongside does the actual building.
  • Straight answers If your wall is fine, I'll tell you so.
  • Work that isn't rushed Brick and block laid carefully so it holds up for years.
(562) 249-2437
Stone-clad outdoor kitchen with stainless appliances and a grill sits on a gray paver patio beside a covered seating area.
  • Licensed and fully insured.
  • Free quotes on site.
  • Replies within 1 business day.

Brick and block work in Fullerton

Caliber Lakewood Concrete and Masonry does brick, block and stone work across Fullerton, at the north end of the area we cover from Lakewood. Most calls here are cracked block walls between yards, tired chimneys and retaining walls for yards that step up or down.

Working in Fullerton: permits, licenses and what sets the price

Building permits in Fullerton come from the city's Building Division, and the city doesn't allow any construction until the permit is issued. That happens after the plans are reviewed and approved and the fees are paid, so on a permitted wall or fireplace, the review sets the start date more than our calendar does.

Before you hire anyone, ask about two things. The city requires anyone doing business in Fullerton to get a business registration certificate before they start, and it says construction contractors need a state license, which it may ask to see before issuing that certificate. On our end, I find out what your job needs from the city, and if it needs a permit, we get it before any work starts.

Price here mostly follows the size and height of the wall or the area being paved, how much old work has to come out first, whether the job needs reinforcing steel and drawn plans, and how hard it is to get material into a backyard. My estimate on site gives you your own figure. We're based in Lakewood, and the same crew works up here in Fullerton and out to Costa Mesa, so you get the same careful work whichever city you're in.

Common Fullerton jobs for our crew

  • Cracked or leaning block walls between yards
  • Retaining walls where the ground slopes
  • Chimney and fireplace repair on older houses
  • Permit applications with the city's Building Division
  • Old concrete out, paver driveways and walkways in

What we do for Fullerton homes

Most Fullerton calls are about walls, chimneys and yard projects, so here's every service we offer and where it usually fits on the houses and lots here.

How a Fullerton masonry job runs once you call

Here's how a job goes from your first call to the final walk-through, with the city's plan review fitted in where it applies.

  1. Call or send the form

    Call (562) 249-2437 or send the form with a few lines about the job, and we'll set a time for me to come out.

  2. I look and price it

    I look at the job myself, ask what you want, and give you an estimate on site that spells out the work and materials.

  3. We get the permit, then build

    Small jobs needing no more than 30 minutes of plan review, like a free-standing block wall, typically clear over the counter. Then our crew builds.

  4. Walk it with you

    When we finish, I walk the job with you, and we haul off the old block, broken brick and leftover mortar.

Why Fullerton homeowners call our crew

  • Stone masonry fireplace beneath a timber pergola, with a lit fire and a dark metal star mounted above.

    We find what failed first

    Before we rebuild anything, we work out why it failed, so the new wall doesn't crack in the same spot.

  • Low stacked-stone retaining wall borders a gray paved pool deck with a diving board and flower beds.

    Steel in every structural wall

    The city's design criteria list Seismic Design Category D, E or F for structural work, so we build walls with reinforcing steel.

  • A broad gray paver driveway leads to a white house, bordered by tropical plants and a light stone edge.

    Learned under older masons

    I learned the trade working under older masons and started this business in 2017, so the work goes the way they taught it.

  • A landscaped backyard waterfall cascades over boulders beside stone retaining walls and steps.

    Replacement brick that matches

    On repairs we match brick and mortar to what's on your house, so a fixed section doesn't stand out from the street.

Get your free on-site masonry estimate in Fullerton

Put your address and a few lines about the wall, chimney or project in the form, and we'll reply within one business day. I'll come out myself for a free estimate on site, with no obligation.

Look through these examples of brick, block and stone work to get a feel for finishes and styles before we talk about yours.

Fullerton masonry questions

These are the questions that come up on Fullerton jobs about walls, permits and cost. If yours isn't here, call and ask about your own job.

Do I need a permit for a block wall or retaining wall in Fullerton?

Often, yes. The city's list of work that generally needs a permit includes retaining walls, fences over 6 feet, patios and fireplaces, so a lot of masonry falls under it. I check your job with the city before we set a start date, and if it needs a permit, we get it.

Which building codes apply to a masonry project in Fullerton?

Projects submitted on or after January 1, 2026 fall under the 2025 California Building Codes with the city's own amendments, which it wrote for local terrain, climate and ground. An application filed before that can stay under the 2022 codes, as long as the permit is issued before the application expires. You can check the current set on the city's building codes page.

How much does a masonry wall cost in Fullerton?

The price of a Fullerton wall comes down to its length and height, the material and what the permit asks for. Block is usually the lower-cost choice, brick and natural stone cost more because each piece takes longer to lay, and a retaining wall adds drainage, steel and plan review. My estimate on site gives you the real number for your wall.

How do I apply for a building permit in Fullerton?

The property owner, a licensed contractor or an authorized agent can apply with the city. A contractor has to provide a certificate of workers' compensation insurance, and owners doing their own work sign the owner-builder verification that state law requires or provide a certificate of insurance. When we're doing the job, we handle the application.

What causes block walls to crack and lean in Fullerton yards?

Usually water, tree roots or a footing that was too small for the wall. Water building up behind a retaining wall pushes it outward, roots lift one section, and older walls with little steel in them crack along the mortar lines when the ground shifts. I'll work out which one it is before telling you what the wall needs.

Is it better to repair or replace an old block wall in Fullerton?

Repair it if the wall still stands straight and the cracks are only in the mortar, and replace it if it's leaning or the footing has failed. A stubborn lean doesn't fix itself, so patching one just buys time. I'll tell you which side your wall falls on, and I won't push a rebuild it doesn't need.

More cities we work in

Pick a city below to see what we know about working there, or call us if yours isn't listed, since we work in more places than these.

Ready to talk about your Fullerton masonry job?

Our hours run to 9 PM every day of the week, so call (562) 249-2437 after work or send the form.